Exclusive Ranges of Starboard Paddleboard Available at Supshed

SUP SHED knows that many surfers often wonder exactly how the board they are riding was built. The process of starboard paddleboard design and construction is surprisingly complicated today, especially when you consider that the surfboards used a century or two ago were literally boards cut from a single tree trunk. While for centuries surfboards were solid wood, the modern era of surfboard design. This early style consisted of two hollow, molded pieces with a piece of redwood running down the center for stability. 

Starboard Paddleboard

Typical surfboards sold today have a polyurethane core, surrounded by fiberglass and polyester resins. The fin of the board is made either of wood or of laminated fiberglass and resin layers. While this basic construction has remained the same for many years, the shapes and styles have certainly changed. Over the past few decades, boards have grown shorter and longer several times, with popular designs including one fin, two fins, or three fins. Today, surfboard makers continue to experiment in the search for the perfect board. Serious surfers may use as many as five or even ten different boards for different surf styles and beaches.

Although there are certainly many brands offering starboard paddleboard, the highest quality surfboards are individually crafted by talented surfboard makers. Although techniques vary from one builder to another, most surfboards are built one at a time starting with the formation of the foam core.  The surfboard builders form this core in a large mold that is roughly the shape of the finished surfboard. Liquid polyurethane is poured into the mold in order to form dense foam. Once cooled, the surfboard core is removed from the mold. Now, the core is cut in half, from the nose all of the way to the tail, to allow for the insertion of the stringer. The purpose of a stringer is to provide stability, keeping the board from snapping in half. Glued between the two halves, the core is then clamped back together.

Now, it's time to finish the shaping of the starboard paddleboard. The outline is cut and then smoothed into its final shape. Some builders use computer-guided machines to do this, while many surfboard builders often use only their experienced eye to guide the shaping process. The blank is now ready to be covered in a fiberglass and resin shell. The core of the board is covered with a fiberglass cloth, and then a layer of polyester laminating resin. When done, the leg leash and fin are attached to the board. During the final finishing process, excess resin is sanded away, leaving a glossy and perfectly smooth coating. 

Getting your own is the first step you take on the exciting road of surfing. This sport is such a fun way to relax and to get away from all the everyday stress that you will fall in love with it in no time. Once the surfing virus hits you, there’s no turning back and you will want to perform at your best; but to do that, you will need good equipment, starting with the surfboard.  To choose gear, you first need to determine where and when you'll be catching a wave. The climate, location, typical wave patterns, and which seasons you'll be surfing in all affect the type of equipment you'll use. How frequently you plan to surf will also affect your choices and how much you'll want to invest in gear. So, if you are looking for starboard paddleboard  then visit the website of SUP SHED.